3D Print Pricing Calculator

Use this calculator to estimate 3d print pricing calculator from your own assumptions. The calculation runs locally in your browser, and the formula, example, scope, and source are visible below.

How to use this calculator

• Filament/resin used (g/ml): enter the value for the same scenario and period as the other inputs.
• Material price per kg/liter: enter the value for the same scenario and period as the other inputs.
• Print time: enter the value for the same scenario and period as the other inputs.
• Printer power draw and electricity rate: enter the value for the same scenario and period as the other inputs.
• Machine hourly/depreciation rate: enter the value for the same scenario and period as the other inputs.
• Hands-on prep/post-processing labor time and rate: enter the value for the same scenario and period as the other inputs.
• Failure/waste reserve %: enter the value for the same scenario and period as the other inputs.
• Other hardware/packaging: enter the value for the same scenario and period as the other inputs.
• Overhead %: enter the value for the same scenario and period as the other inputs.
• Target margin %: enter the value for the same scenario and period as the other inputs.
• Quantity: enter the value for the same scenario and period as the other inputs.

1. Replace the example values with values from one consistent scenario.
2. Select Calculate and review the primary and supporting results.
3. Change one assumption at a time when comparing scenarios, then verify material decisions against the governing source or a qualified professional.

Formula and method

material_cost = material_used * unit_material_cost
electricity_cost = print_hours * printer_power_kW * electricity_rate
machine_cost = print_hours * machine_hourly_rate
labor_cost = hands_on_hours * labor_rate
direct = material_cost + electricity_cost + machine_cost + labor_cost + other_hardware_packaging
risk_adjusted_cost = direct * (1 + failure_reserve_pct)
loaded_cost = risk_adjusted_cost * (1 + overhead_pct)
price = loaded_cost / (1 - target_margin_pct)

The implementation uses the audited A11 — Service Quote / Hourly Rate method. Intermediate values retain calculation precision; the interface formats values only for display unless the formula itself specifies a rounding rule.

Worked example

Inputs: 150g filament at $25/kg; 8h print; 120W; $0.18/kWh; Machine=$1.50/h; 45min labor at $25/h; Failure reserve=10%; Overhead=10%; Margin=35%

Result: Material=$3.75; Electricity=$0.17; Machine=$12.00; Labor=$18.75; Loaded cost=$41.95; Price=$64.54

This is the baseline audited scenario used to check that the page, formula, and displayed result remain aligned.

How to interpret the result

The calculator reports Material/electricity/machine/labor breakdown; loaded cost; recommended price; profit. Treat the output as a scenario estimate: it changes when the entered scope, time period, fee basis, or cost definition changes. It does not establish a universal benchmark or guarantee a business outcome.

Assumptions and limitations

• Corrected from a generic labor-hours service quote. Pricing inputs are shop-specific.

• no universal machine hourly rate.

• Results are informational planning estimates, not accounting, tax, legal, employment, valuation, or investment advice.

• Values are processed in the browser and are not submitted to an application server.

Common mistakes

• Material qty=0.

• machine life assumptions.

• failed print reserve.

• batch sharing of setup/design.

• taxes/shipping separate.

• Corrected from a generic labor-hours service quote. Pricing inputs are shop-specific.

• no universal machine hourly rate.

• Rounding intermediate values before completing the formula can change the final result.

• A worked example is not a default recommendation; replace every assumption that does not match your case.

Frequently asked questions

How this calculator was created and tested

• Formula basis: the public formula is generated from the audited implementation specification for this calculator, not inferred from a search snippet or an AI answer.
• Validation coverage: 2 of 2 release test vectors are marked Audited for this calculator. The suite covers a normal scenario plus boundary or invalid-input behavior where defined.
• Regression behavior: build checks compare expected outputs, validation states, route integrity, structured data, internal links, and release blockers before publication.
• Automation and AI: automation or AI may assist drafting, organization, and regression work, but it is not treated as an authoritative source and does not override the audited formula, official rate registry, or release blockers.
• Editorial responsibility: MIASIN S.R.O. controls publication, source policy, corrections, and release decisions. No named individual expert review is claimed unless a page explicitly identifies one.

Read the full Methodology, Editorial Standards, and Corrections Policy.

Sources and freshness

Sources are ordered by authority: government or official sources first, then first-party platform sources, educational references, and finally supporting industry references.

• Educational reference: OpenStax
• Supporting industry reference: industrialcalculators.com

Last reviewed: September 22, 2026
Source set reviewed: September 22, 2026
Next scheduled review: September 22, 2027
Review cadence: Annual for wage reference; formula stable